ProSafe M4100 and M7100 Managed Switches

d.Click the gray boxes under ports 1 and 24 until U displays. The U specifies that the egress packet is untagged for the port.

e.Click Apply.

3.Assign PVID to the VLAN 200.

a.Select Switching > VLAN> Advanced > Port PVID Configuration. A screen similar to the following displays.

b.Under Port PVID Configuration, scroll down and select the 1/0/1 check box.

c.In the PVID (1 to 4093) field, enter 200.

d.Click Apply to save the settings.

4.Create a new DHCP pool.

a.Select System > Services > DHCP Server > DHCP Server Configuration. A screen similar to the following displays.

b.For Admin Mode, select the Enable radio button.

c.Click Apply to enable the DHCP service.

d.Select System > Services > DHCP Server > DHCP Pool Configuration.

Chapter 22. DHCP Server 383

Page 383
Image 383
NETGEAR M4100, M7100 manual Select System Services Dhcp Server Dhcp Pool Configuration