ProSafe M4100 and M7100 Managed Switches

Web Interface: Configure the Switch with an External Multicast Router

1.Select Switching > Multicast > Multicast Router Configuration. A screen similar to the following displays.

2.Under Multicast Router Configuration, scroll down and select the Interface 1/0/3 check box. Now 1/0/3 appears in the Interface field at the top.

3.In the Admin Mode field, select Enable.

4.Click Apply.

Multicast Router Using VLAN

The example is shown as CLI commands and as a Web interface procedure.

CLI: Configure the Switch with a Multicast Router Using VLAN

This example configures the interface to forward only the snooped IGMP packets that come from VLAN ID (<VLAN Id>) to the multicast router attached to this interface.

(Netgear Switch)(Interface 1/0/3)# set igmp mrouter 2

Web Interface: Configure the Switch with a Multicast Router Using VLAN

1.Select Switching > Multicast > Multicast Router VLAN Configuration.

Chapter 13. IGMP Snooping and Querier 249

Page 249
Image 249
NETGEAR M4100, M7100 manual CLI Configure the Switch with a Multicast Router Using Vlan