NETGEAR M4100, M7100 manual Dvrmp on Switch B, Create routing ports 1/0/13 and 1/0/20

ProSafe M4100 and M7100 Managed Switches

(Netgear Switch) #show ip mcast mroute summary
	Multicast Route Table Summary		Incoming	Outgoing
Source IP	Group IP	Protocol	Interface	Interface List
-------------	------------	----------	---------	---------------
192.168.1.2	225.0.0.1	DVMRP	1/0/1	1/0/21

DVRMP on Switch B

1.Create routing ports 1/0/13 and 1/0/20.

(Netgear Switch) #config

(Netgear Switch) (Config)#ip routing (Netgear Switch) (Config)#interface 1/0/13 (Netgear Switch) (Interface 1/0/13)#routing

(Netgear Switch) (Interface 1/0/13)#ip address 192.168.2.2 255.255.255.0 (Netgear Switch) (Interface 1/0/13)#exit

(Netgear Switch) (Config)#interface 1/0/20 (Netgear Switch) (Interface 1/0/20)#routing

(Netgear Switch) (Interface 1/0/20)#ip address 192.l.168.4.1 255.255.255.0 (Netgear Switch) (Interface 1/0/20)#exit

(Netgear Switch) (Config)#exit

2.Enable IP multicast forwarding on the switch.

(Netgear Switch) (Config)#ip multicast

3.Enable DVMRP protocol on the switch.

(Netgear Switch) (Config)#ip dvmrp

4.Enable DVMRP mode on interfaceS 1/0/13 and 1/0/20.

(Netgear Switch) (Config)#interface 1/0/13 (Netgear Switch) (Interface 1/0/13)#ip dvmrp (Netgear Switch) (Interface 1/0/13)#ex (Netgear Switch) (Config)#interface 1/0/20 (Netgear Switch) (Interface 1/0/20)#ip dvmrp (Netgear Switch) (Interface 1/0/20)#exit (Netgear Switch) (Config)#exit

Chapter 31. DVMRP 527