NETGEAR M4100, M7100 manual IP Address field, enter Subnet Mask field, enter

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.Scroll down and select the Interface 1/0/21 check box. Now 1/0/21 appears in the Interface field at the top.

c.Enter the following information:

•In the IP Address field, enter 192.168.2.1.

•In the Subnet Mask field, enter 255.255.255.0.

•In the Routing Mode field, select Enable.

d.Click Apply to save the settings.

3.Configure 1/0/22 as a routing port and assign an IP address to it.

a.Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to the following displays.

b.Scroll down and select the Port 1/0/22 check box. Now 1/0/22 appears in the Port field at the top.

c.Enter the following information:

•In the IP Address field, enter 192.168.6.2.

•In the Subnet Mask field, enter 255.255.255.0.

•In the Routing Mode field, select Enable.

d.Click Apply to save the settings.

Chapter 28. PIM 481