NETGEAR M7100, M4100 manual IP Address field, enter Network Mask field, enter

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.Enter the following information:

•In the Vlan ID field, enter 202.

•In the IP Address field, enter 10.100.5.34.

•In the Network Mask field, enter 255.255.255.0.

c.Click Unit 1. The ports display:

d.Click the gray box under port 48 twice until U displays. The U specifies that the egress packet is untagged for the port.

e.Click Apply to save the VLAN that includes port 48.

4.Enable IP routing:

a.Select Routing > IP > Basic > IP Configuration. A screen similar to the following displays.

b.Under IP Configuration, make the following selections:

•For Routing Mode, select the Enable radio button.

•For IP Forwarding Mode, select the Enable radio button.

c.Click Apply to enable IP routing.

5.Configure default route for VLAN 202:

278 Chapter 15. Security Management