NETGEAR M7100, M4100 Dhcp L3 Relay, Configure the Dhcp Server Switch, CLI Configure a Dhcp Server

ProSafe M4100 and M7100 Managed Switches

DHCP L3 Relay

This case has two steps, DHCP server configuration and DHCP L3 relay configuration. This example shows how to configure a DHCP L3 relay on a NETGEAR switch and how to configure DHCP pool to assign IP addresses to DHCP clients using DHCP L3 relay.

DHCP server DHCP L3 relay

1/0/3 1/0/4 1/0/16

1/0/15

PC

PC

Figure 48. DHCP L3 relay

Configure the DHCP Server Switch

CLI: Configure a DHCP Server

1.Enable routing on the switch.

(Netgear Switch) #config

(Netgear Switch) (Config)#ip routing (Netgear Switch) (Config)#

494 Chapter 29. DHCP L2 Relay and L3 Relay