NETGEAR M7100, M4100 manual Netgear Switch Config#logging traps

ProSafe M4100 and M7100 Managed Switches

CLI: Send Log Messages to admin@switch.com Using Account aaaa@netgear.com

1.Configure an SMTP server, for example, smtp.netgear.com. Before you configure the smtp server, you need to have an account on SMTP server.

(Netgear Switch) (Config)#mail-server "smtp.netgear.com" port 465 (Netgear Switch) (Mail-Server)#security tlsv1

(Netgear Switch) (Mail-Server)# username aaaa (Netgear Switch) (Mail-Server)# password xxxxxx (Netgear Switch) (Mail-Server)#exit

2.Configure logging mail. From-addr is the source address of email and to-addr is the destination address of email.

(Netgear Switch) (Config)#logging email

(Netgear Switch) (Config)#logging email from-addr aaaa@netgear.com

(Netgear Switch) (Config)#logging email message-type urgent to-addr admin@switch.com (Netgear Switch) (Config)#logging email message-type non-urgent to-addr admin@switch.com

3.Increase the severity of traps to 3 (error). By default, it is 6 (infor).

(Netgear Switch) (Config)#logging traps 3

348 Chapter 18. Syslog