NETGEAR M4100, M7100 manual Group Mask field, enter, Click Add Set up BSR Candidate configuration

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.Scroll down and select the Interface 1/0/21, 1/0/22, and 1/0/24 check boxes.

c.In the Admin Mode field, select Enable.

d.Click Apply to save the settings.

11.Set up Candidate RP configuration.

a.Select Routing > Multicast > PIM > Candidate RP Configuration. A screen similar to the following displays.

b.In the Interface list, select 1/0/22.

c.In the Group IP field, enter 225.1.1.1.

d.In the Group Mask field, enter 255.255.255.0.

e.Click Add.

12.Set up BSR Candidate configuration.

a.Select Routing > Multicast > PIM > BSR Candidate Configuration.

Chapter 28. PIM 485