NETGEAR M4100, M7100 manual Configure Private-VLAN Port Mode Promiscuous, Host

ProSafe M4100 and M7100 Managed Switches

Configure Private-VLAN Port Mode (Promiscuous, Host)

The example is shown as CLI commands and as a Web interface procedure.

CLI: Configure Private-VLAN Port Mode (Promiscuous, Host)

Use the following commands to assign port 1/0/1 to promiscuous port mode and ports 1/0/2-1/0/5 to host port mode.

(Netgear Switch)	#config
(Netgear Switch)	(Config)#interface 1/0/1
(Netgear Switch)	(Interface 1/0/1)#switchport mode private-vlan promiscuous
(Netgear Switch)	(Interface 1/0/1)#exit
(Netgear Switch)	(Config)#interface 1/0/2-1/0/5
(Netgear Switch)	(Interface 1/0/2-1/0/5)#switchport mode private-vlan host
(Netgear Switch)	(Interface 1/0/2-1/0/5)#end

Web Interface: Configure Private-VLAN Port Mode (Promiscuous, Host)

1.Configure port 1/0/1 to promiscuous port mode.

a.Select Security > Traffic Control > Private VLAN > Private VLAN Port Mode Configuration.

A screen similar to the following displays.

b.Under Private VLAN Port Mode Configuration, select the 1/0/1 interface check box.

Now 1/0/1 appears in the Interface field at the top.

c.In the Port VLAN Mode field, select Promiscuous from the pull-down menu.

Chapter 2. VLANs 49