ProSafe M4100 and M7100 Managed Switches

Set disable 1583compatibility to prevent a routing loop.

(Netgear Switch) (Config)#router ospf (Netgear Switch) (Config router)#enable

(Netgear Switch) (Config router)#router-id 192.130.1.1 (Netgear Switch) (Config router)#no 1583compatibility (Netgear Switch) (Config router)#exit

(Netgear Switch) (Config)#exit

4.Enable OSPF for the ports, and set the OSPF priority and cost for the ports.

(Netgear Switch) #config

(Netgear Switch) (Config)#interface 1/0/2 (Netgear Switch) (Interface 1/0/2)#ip ospf

(Netgear Switch) (Interface 1/0/2)#ip ospf areaid 0.0.0.2 (Netgear Switch) (Interface 1/0/2)#ip ospf priority 128 (Netgear Switch) (Interface 1/0/2)#ip ospf cost 32 (Netgear Switch) (Interface 1/0/2)#exit

(Netgear Switch) (Config)#interface 1/0/3 (Netgear Switch) (Interface 1/0/3)#ip ospf

(Netgear Switch) (Interface 1/0/3)#ip ospf areaid 0.0.0.2 (Netgear Switch) (Interface 1/0/3)#ip ospf priority 255 (Netgear Switch) (Interface 1/0/3)#ip ospf cost 64 (Netgear Switch) (Interface 1/0/3)#exit

(Netgear Switch) (Config)#interface 1/0/4 (Netgear Switch) (Interface 1/0/4)#ip ospf

(Netgear Switch) (Interface 1/0/4)#ip ospf areaid 0.0.0.2 (Netgear Switch) (Interface 1/0/4)#ip ospf priority 255 (Netgear Switch) (Interface 1/0/4)#ip ospf cost 64 (Netgear Switch) (Interface 1/0/4)#exit

(Netgear Switch) (Config)#exit

Web Interface: Configure OSPF on a Border Router

1.Enable IP routing on the switch.

a. Select Routing > IP > Basic > IP Configuration.

Chapter 7. OSPF 93

Page 93
Image 93
NETGEAR M4100 Web Interface Configure Ospf on a Border Router, Set disable 1583compatibility to prevent a routing loop