NETGEAR M4100, M7100 Dvmrp on Switch C, Select Routing IP Advanced IP Interface Configuration

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.Scroll down and select the Interface 1/0/13 and 1/0/20 check boxes.

c.In the Interface Mode field, select Enable.

d.Click Apply to save the settings.

DVMRP on Switch C

1.Enable IP routing on the switch.

a. Select Routing > IP > Basic > IP Configuration. A screen similar to the following displays.

b.For Routing Mode, select the Enable radio button.

c.Click Apply.

2.Configure 1/0/11 as a routing port and assign an IP address to it.

a.Select Routing > IP > Advanced > IP Interface Configuration.

Chapter 31. DVMRP 537