NETGEAR manual ProSafe M4100 and M7100 Managed Switches

ProSafe M4100 and M7100 Managed Switches

Make sure that 1/0/12 and 1/0/6 are configured as force authorized before you do this step; otherwise you cannot access the switch through the Web Interface.

a.Select Security > Port Authentication > Basic > 802.1x Configuration. A screen similar to the following displays.

b.For Administrative Mode, select the Enable radio button.

c.Click Apply to save settings.

5.Configure the dot1x authentication list.

a.Select Security > Management Security > Authentication List > Dot1x Authentication List.

A screen similar to the following displays.

b.Select the defaultList check box.

c.In the 1 list, select RADIUS.

d.Click Add.

6.Configure the RADIUS authentication server.

a.Select Security > Management Security > Radius > Server Configuration.

290 Chapter 15. Security Management