Agilent Technologies 6843A TRIGger:SOURce, TRIGger:SEQuence2:SOURce, TRIGger SYNChronize SOURce

3 - Language Dictionary

TRIGger:SOURce

This command selects the trigger source for the first sequence in generating a step, pulse, or list output as follows:

BUS	GPIB device, *TRG, or <GET> (Group Execute Trigger)
EXTernal	ac source’s backplane Trigger In BNC
IMMediate	trigger is generated as soon as the trigger system is initiated.

Command Syntax	TRIGger[:SEQuence1]:SOURce <CRD>
	TRIGger[:TRANsient]:SOURce <CRD>
Parameters	BUS EXTernal IMMediate
*RST Value	BUS
Examples	TRIG:SOUR BUS	TRIG:TRAN:SOUR EXT
Query Syntax	TRIGger[:SEQuence1]:SOURce?
	TRIGger[:TRANsient]:SOURce?
Returned Parameters	<CRD>
Related Commands	ABOR TRIG TRIG:DEL		TRIG:SYNC
	TRIG:SYNC:PHAS	INIT	INIT:CONT *TRG WAI

TRIGger:SEQuence2:SOURce

TRIGger:SYNChronize:SOURce

These commands select the synchronizing trigger source in generating a step, pulse, or list output as follows:

IMMediate

PHASe

Starts the transient output immediately, unless a delay time other than 0 has been specified by TRIGger:DELay. In this case the transient output starts after the expiration of the delay time.

Starts the transient output at the reference phase set by TRIG:SYNC:PHAS.

Command Syntax	TRIGger:SEQuence2:SOURce <CRD>
	TRIGger:SYNChronize:SOURce <CRD>
Parameters	IMMediate PHASe
*RST Value	IMMediate
Examples	TRIG:SYNC:SOUR IMM	TRIG:SEQ2:SOUR PHAS
Query Syntax	TRIGger:SEQuence2:SOURce?
	TRIGger:SYNChronize:SOURce?
Returned Parameters	<CRD>
Related Commands	ABOR TRIG TRIG:DEL	TRIG:SOUR
	TRIG:SYNC:PHAS INIT	INIT:CONT *TRG WAI

110