Agilent Technologies 6814B, 6834B, 6843A, 6813B, 6811B Output Subsystem, OUTPut, Subsystem Syntax

Language Dictionary - 3

Output Subsystem

This subsystem controls the main outputs, the signal outputs, the power-on state, and the output protection function of the ac source.

Subsystem Syntax

OUTPut
[:STATe] <bool>	Enable/disable output voltage, current, power, etc.
:COUPling <coupling>	Enables ac or dc output coupling (AC DC)
:DFI
[:STATE] <bool>	Enable/disable DFI output
:SOURce <source>	Selects an event source (QUES OPER ESB RQS OFF)
:IMPedance
[:STATE] <bool>	Enable/disable output impedance programming
:REAL <n>	Sets resistive part of output impedance
:REACtive <n>	Sets inductive part of output impedance
:PON
:STATe <state>	Set power-on state (*RST *RCL0)
:PROTection
:CLEar	Reset latched protection
:DELay <n>	Delay after programming/before protection
:RI
:MODE <mode>	Set remote inhibit input (LATC LIVE OFF)
:TTLTrg
[:STATE] <bool>	Enable/disable trigger out drive
:SOURce <source>	Selects a TTLTrg source (BOT EOT LIST)

OUTPut

This command enables or disables the output. The state of a disabled output is an output voltage amplitude set to 0 volts, with output relays opened.

The query form returns the output state.

Command Syntax	OUTPut[:STATe] <bool>
Parameters	0 1 OFF ON
*RST Value	OFF
Examples	OUTP 1	OUTP:STAT ON
Query Syntax	OUTPut[:STATe]?
Returned Parameters	0 1
Related Commands	*RCL	*SAV

55