Agilent Technologies 6834B LIST:VOLTage:SLEW:POINts?, LIST VOLTageOFFSet, List:Volt:Slew:Poin?

3 - Language Dictionary

LIST:VOLTage:SLEW:POINts?

This query returns the number of points specified in LIST:VOLTage:SLEW. Note that it returns only the total number of points, not the point values.

Query Syntax	[SOURce:]LIST:VOLTage:SLEW:POINTs?
Returned Parameters	<NR1>
Examples	LIST:VOLT:SLEW:POIN?
Related Commands	LIST:VOLT:SLEW

LIST:VOLTageOFFSet

Agilent 6811B, 6812B, 6813B, Only

This command specifies the dc offset points in a list. The offset points are given in the command parameters, which are separated by commas. The order in which the points are entered determines the sequence in which they are output when a list is triggered. Changing list data while a subsystem is in list mode generates an implied ABORt.

The maximum peak voltage that the ac source can output is 425 V peak. This includes any combination of voltage, voltage offset, and function shape values. Therefore, the maximum value that can be programmed depends on the peak-to-rms ratio of the selected waveform. For a sinewave, the maximum voltage that can be programmed is 300 V rms.

Command Syntax	[SOURce:]LIST:VOLTage:OFFSet <NRf+> {,<NRf+>}
Parameters	–425 to +425 MAXimum MINimum
Unit	V (dc voltage)
Examples	LIST:VOLT:OFFS 50,75,100
Query Syntax	[SOURce:]LIST:VOLTage:OFFSet?
Returned Parameters	<NR3> {,<NR3>}
Related Commands	LIST:VOLT:OFFS:POIN? LIST:COUN LIST:DWEL
	LIST:STEP LIST:VOLT:SLEW

LIST:VOLTage:OFFSet:POINts?

Agilent 6811B, 6812B, 6813B, Only

This query returns the number of points specified in LIST:VOLTage:OFFSet. Note that it returns only the total number of points, not the point values.

Query Syntax	[SOURce:]LIST:VOLTage:OFFSet:POINTs?
Returned Parameters	<NR1>
Examples	LIST:VOLT:OFFS:POIN?
Related Commands	LIST:VOLT:OFFS

78