Agilent Technologies 6812B, 6834B, 6814B, 6843A, 6813B, 6811B manual PULSe:HOLD, Puls:Hold Dcyc

Language Dictionary - 3

PULSe:HOLD

This command specifies whether the pulse width or the duty cycle is to be held constant when the pulse period changes. The following tables describe how the duty cycle, period, and width are affected when one, two, or all three parameters are set in a single program message.

Command Syntax	[SOURce:]PULSe:HOLD <parameter>
Parameters	WIDTh DCYCle
*RST Value	WIDTh
Examples	PULS:HOLD DCYC
Query Syntax	[SOURce:]PULSe:HOLD?
Returned Parameters	<CRD>
Related Commands	PULS:COUN PULS:DCYC PULS:PER PULS:WIDT
		PULSe:HOLD = WIDTh

	Parameter Set
DCYCle		PERod	WIDTh
			Set
		Set
		Set	Set
Set
Set			Set
Set		Set
Set		Set	Set

Parameter Set

DCYCle	PERod	WIDTh
		Set
	Set
	Set	Set
Set
Set		Set
Set	Set
Set	Set	Set

Action

Sets WIDTh. If WIDTh < PERiod, recalculates DCYCle; otherwise recalculates the PERiod and DCYCle.

Sets PERiod. If WIDTh < PERiod, recalculates DCYCle; otherwise recalculates the PERiod and DCYCle.

Sets WIDTh. If WIDTh < PERiod, sets the PERiod and recalculates DCYCle; otherwise recalculates the PERiod and DCYCle.

Sets DCYCle and recalculates the PERiod.

Sets DCYCle and WIDth and recalculates the PERiod.

Sets DCYCle and PERiod and recalculates the WIDTh.

Sets WIDTh. If WIDTh < PERiod, sets the PERiod and recalculates DCYCle; otherwise recalculates the PERiod and DCYCle.

PULSe:HOLD = DCYCle

Action

Sets WIDTh and recalculates the PERiod.

Sets PERiod and recalculates the WIDTh.

Sets WIDTh. If WIDTh < PERiod, sets the PERiod and recalculates DCYCle; otherwise recalculates the PERiod and DCYCle.

Sets DCYCle and recalculates the PERiod.

Sets DCYCle and WIDth and recalculates the PERiod.

Sets DCYCle and PERiod and recalculates the WIDTh.

Sets WIDTh. If WIDTh < PERiod, sets the PERiod and recalculates DCYCle; otherwise recalculates the PERiod and DCYCle.

83