Agilent Technologies 6811B, 6834B, 6814B, 6843A, 6813B, 6812B SENSe:CURRent:PREFerence, SENSe:WINDow

E - IEC Mode Command Summary

SENSe:CURRent:PREFerence

This command sets the phase reference for current harmonic phase measurements. If VOLTage is selected, the reference is the fundamental component of the measured output voltage. If CURRent is selected, the reference is the fundamental component of the measured output current.

Command Syntax	SENSe:CURRent:PREFerence <CRD>
Parameters	VOLTage CURRent
*RST Value	CURRent
Examples	SENS:CURR:PREF CURR
Query Syntax	SENSe:CURRent:PREF?
Returned Parameters	<CRD>
Related Commands	ABORt MEAS:ARR:CURR:PHAS

SENSe:WINDow

This command sets the window function which is used in harmonic measurements. The choice of parameters is affected by the SYSTem:CONF command. If NORMal is selected, HANNing, KBESsel, or RECTangular may be selected. IF IEC mode is selected, only HANNing and RECTangular may be selected. KBESsel is the preferred window and should be used for most measurements in NORMal mode. HANNing and RECTangular are available for making harmonic current measurements that comply with the regulatory requirements.

Command Syntax	SENSe:WINDow [:TYPE] <window>
Parameters	HANNing KBESsel RECTangular
*RST Value	KBESsel
	(RECTangular is the default setting when the Agilent 14761A software is
	run)
Examples	SENS:WIND RECT
Query Syntax	SENSe:WINDow?
Returned Parameters	<CRD>
Related Commands	MEASure:ARRay:CURRent:HARMonic? SYSTem:CONF
	MEASure:CURRent:HARMonic?
	MEASure:ARRay:VOLTage:HARMonic?
	MEASure:VOLTage:HARMonic?

178