Agilent Technologies 6812B manual Source Subsystem Frequency, FREQuency:MODE, Subsystem Syntax

Language Dictionary - 3

Source Subsystem (Frequency)

This subsystem programs the output frequency of the ac source.

Subsystem Syntax

[SOURce:]
FREQuency
[:CW :IMMediate] <n>	Sets the frequency
:MODE <mode>	Sets frequency mode (FIX STEP PULS LIST)
:SLEW
[:IMMediate] <n> INFinity	Sets the frequency slew rate
:MODE <mode>	Sets frequency slew mode (FIX STEP PULS LIST)
:TRIGgered <n> INFinity	Sets the triggered frequency slew rate
:TRIGgered <n>	Sets the triggered frequency
FREQuency

This command sets the frequency of the output waveform.

Command Syntax	[SOURce:]FREQuency[:CW :IMMediate] <NRf+>
Parameters	refer to Specifications Table in User’s Guide
Unit	HZ (hertz)
*RST Value	60
Examples	FREQ 50
Query Syntax	[SOURce:]FREQuency[:CW :IMMediate]?
Returned Parameters	<NR3>
Related Commands	FREQ:MODE FREQ:SLEW

FREQuency:MODE

This command determines how the output frequency is controlled during a triggered output transient. The choices are:

FIXed	The output frequency is unaffected by a triggered output transient.
STEP	The output frequency is programmed to the value set by FREQuency:TRIGgered when a
	triggered transient occurs.
PULSe	The output frequency is changed to the value set by FREQuency:TRIGgered for a duration
	determined by the pulse commands.
LIST	The output frequency is controlled by the frequency list when a triggered transient occurs.

Command Syntax

Parameters

*RST Value

Examples

Query Syntax

Returned Parameters

Related Commands

[SOURce:]FREQuency:MODE <mode> FIXed STEP PULSe LIST FIXed

FREQ:MODE FIX

[SOURce:]FREQuency:MODE?

<CRD>

FREQ FREQ:TRIG

65