Agilent Technologies 6813B, 6834B TRIGger:SEQuence2:PHASe TRIGger:SYNCHronize:PHASe, Query Syntax

Language Dictionary - 3

TRIGger:SEQuence2:PHASe

TRIGger:SYNCHronize:PHASe

These commands set the phase angle with respect to an internal phase reference at which PHASe:SYNChronous:SOURce becomes true. The range is from −360 to +360 degrees.

Command Syntax

Parameters

*RST Value

Examples

Query Syntax

Returned Parameters Related Commands

TRIGger:SEQuence2:PHASe <NRf+>

TRIGger:SYNChronize:PHASe <NRf+>

−360 to +360 (degrees) MAXimum MINimum

0
TRIG:SYNC:PHAS 90	TRIG:SEQ2:PHAS 180

TRIGger:SEQuence2:PHASe?

TRIGger:SYNChronize:PHASe?

<NR3>

ABOR TRIG TRIG:DEL TRIG:SYNC INIT INIT:CONT *TRG WAI

TRIGger:SEQuence3

TRIGger:ACQuire

When the trigger subsystem has been initiated, these commands generate a measurement trigger regardless of the selected trigger source. The measurement trigger causes the to digitize the instantaneous output voltge and current for several output cycles and store the results in a buffer.

The FETCh commands return the requested calculation from this acquired data. When the measurement completes, the WTG bit in the Status Operation Condition register is cleared.

Command Syntax	TRIGger:SEQuence3[:IMMediate]
	TRIGger:ACQuire:[:IMMediate]
Parameters	None
Examples	TRIG:ACQ	TRIG:SEQ3:IMM
Related Commands	ABOR TRIG	TRIG:DEL	TRIG:SYNC
	TRIG:SYNC:PHAS INIT		INIT:CONT *TRG WAI

111