Agilent Technologies 6834B, 6814B, 6843A, 6813B, 6811B, 6812B manual Command Syntax

E - IEC Mode Command Summary

Command Syntax

CALCulate
:INTegral
:TIME <Nrf+>		selects the Pst integration time for flicker measurements
:LIMit
:UPPer		sets various limits associated with rms voltage
	[:DATA] <Nrf+>	fluctuation testing for IEC 1000-3-3
:SMOothing <bool>		turns the 1.5 second smoothing filter on or off
FORMat
[:DATA]	<type>	specifies the response data format ( ASCii REAL )
:BORDer	<type>	sets the byte order of the floating point values returned
		( NORMal SWAPped )
MEASure
:ARRay
:CURRent
	:HARMonic? <NRf+>	returns an array of current harmonic magnitudes
:VOLTage
	:FLUCtuations
	:FLICker? <NRf+>	returns rms and instantaneous flicker values
	:PST? <NRf+>	returns Pst summary values
	:ALL? <NRf+>	returns both rms/flicker and Pst summary values
SENSe
:CURRent		sets the phase reference for current harmonic phase
:PREFerence <type>		measurements ( VOLTage CURRent )
:WINDow
[:TYPE] <type>		selects the window function used in the harmonic
		measurements ( HANNing KBESsel RECTangular )
SYSTem
:CONFigure <mode>		selects the operating mode of the ac source
		( NORMal IEC )

168