Agilent Technologies 6813B, 6834B, 6814B, 6843A, 6811B, 6812B manual VOLTage:MODE, VOLTage:OFFSet

Language Dictionary - 3

VOLTage:MODE

Phase Selectable

This command determines how the ac rms output voltage is controlled during a triggered output transient. The choices are:

FIXed	The voltage is unaffected by a triggered output transient.
STEP	The voltage is programmed to the value set by VOLTage:TRIGgered when a triggered
	transient occurs.
PULSe	The voltage is changed to the value set by VOLTage:TRIGgered for a duration determined
	by the pulse commands.
LIST	The voltage is controlled by the voltage list when a triggered transient occurs.

Command Syntax

Parameters

*RST Value

Examples

Query Syntax

Returned Parameters

Related Commands

[SOURce:]VOLTage:MODE <mode> FIXed STEP PULSe LIST

FIXed
VOLT:MODE FIX	VOLT:MODE:LIST

[SOURce:]VOLTage:MODE?

<CRD>

VOLT VOLT:TRIG

VOLTage:OFFSet

Agilent 6811B, 6812B, 6813B, Only

This command programs the dc output voltage level of the ac source.

The maximum peak voltage that the ac source can output is 425 V peak. This includes any combination of voltage, voltage offset, and function shape values. Therefore, the maximum value that can be programmed depends on the peak-to-rms ratio of the selected waveform. For a sinewave, the maximum voltage that can be programmed is 300 V rms.

NOTE:	The OUTPut:COUPling must be set to DC to get non-zero dc output.
	Command Syntax	[SOURce:]VOLTage:OFFSet[:IMMediate] <NRf+>
	Parameters	–425 to +425 MAXimum MINimum
	Unit	V (dc voltage)
	*RST Value	0
	Examples	VOLT:OFFS 100
	Query Syntax	[SOURce:]VOLTage:OFFSet[:IMMediate]?
	Returned Parameters	<NR3>
	Related Commands	VOLT:OFFS:MODE OUTP:COUP FUNC:SHAP

87