Agilent Technologies 6843A, 6834B, 6814B, 6813B, 6811B E9012 Language Command Summary, Entry Keys

D - Elgar Model 9012 Compatibility

Input key functions:
Display Format	Description
INP:COUP <enum>	Set coupling for front panel measurements (AC DC ACDC)
Trigger Control key functions:
Display Format	Description
JUMPER1 <enum>	Set W1 emulation jumper (NORM ALT)
Pulse key functions:
Display Format	Description
DROP <value>	Dropout for <value> half cycles (JUMPER1 NORM) or
	for <value> full cycles (JUMPER1 ALT)

Entry Keys

The Calibration key is not operational in E9012 language. All other Entry keys are identical in SCPI and E9012 languages.

E9012 Language Command Summary

Command

<Device Clear>

VOLTS <n>

CURL <n>

FREQ <n>

RNG 0 1

RNGF 0 1 2

CLS

OPN

LOCK

UNLK

Description

Set the instrument to the power-on state and clear the error queue and the serial poll response byte.

Set the rms output voltage.

Set the rms output current limit. A value of 0 disables over-current protection and sets the current limit function to allow maximum load current.

Sets the output frequency.

Set the output voltage range.

0 = low range

1 = high range

If the voltage range is changing, the output voltage is set to 0. If the voltage range is not changing, the output voltage is unaffected.

Set output frequency range.

0 = to 99.99Hz

1 = to 999.9Hz

2 = to 1200Hz

If the frequency range is changing, the frequency is set to 60Hz for range 0, and to 400Hz for ranges 1 and 2. If the frequency range is not changing, the output frequency is unaffected.

Closes the output relay

Opens the output relay

Disables fault shutdown

Enables fault shutdown

164