Agilent Technologies 6814B, 6843A INSTrument:NSELect INSTrument:SELect, Agilent 6834B Only

3 - Language Dictionary

INSTrument:NSELect

INSTrument:SELect

Agilent 6834B Only

These commands allow the selection of individual outputs in a three-phase model for subsequent commands or queries. Their operation is dependent on the setting of INSTrument:COUPle. If INST:COUP NONE is programmed, then the phase selectable commands are sent only to the particular output phase set by INSTrument:NSELect. If INST:COUP ALL is programmed, then all commands are sent to all three output phases.

INSTrument:NSELect selects the phase by its number, while INSTrument:SELect references it by name. These commands also select which output phase returns data when a query is sent.

Command Syntax

Parameters

*RST Value

Examples

Query Syntax

Returned Parameters

Related Commands

INSTrument:NSELect <NR1> INSTrument:SELect <output> For INST:NSEL 1 2 3

For INST:SEL OUTPut1 OUTPut2 OUTPut3

1 or OUTPut1
INST:NSEL 3	INST:SEL OUTP1

INSTrument:NSELect?

<NR1>

INST:COUP

36