Agilent Technologies 6813B, 6834B, 6814B, 6843A, 6811B, 6812B manual PHASe:MODE, PHASe:TRIGgered

Language Dictionary - 3

PHASe:MODE

Phase Selectable

This command determines how the output phase is controlled during a triggered output transient. The choices are:

FIXed	The output phase is unaffected by a triggered output transient.
STEP	The output phase is programmed to the value set by PHASe:TRIGgered when a triggered
	transient occurs.
PULSe	The output phase is changed to the value set by PHASe:TRIGgered for a duration
	determined by the pulse commands.
LIST	The output phase is controlled by the phase list when a triggered transient occurs.

Command Syntax

Parameters

*RST Value

Examples

Query Syntax

Returned Parameters

Related Commands

[SOURce:]PHASe:MODE <mode> FIXed STEP PULSe LIST

FIXed
PHAS:MODE LIST	PHAS:MODE FIX

[SOURce:]PHASe:MODE?

<CRD>

PHAS PHAS:TRIG

PHASe:TRIGgered

Phase Selectable

This command sets the output phase when a triggered step or pulse transient occurs. The phase of the output voltage waveform is expressed relative to an internal reference. The phase angle is programmed in degrees. Positive phase angles are used to program the leading phase, and negative phase angles are used to program the lagging phase.

The PHASe command is not influenced by INSTrument:COUPle ALL. It applies only to the current output phase selected by INSTrument:NSELect.

Command Syntax

Parameters

*RST Value

Examples

Query Syntax

Returned Parameters

Related Commands

[SOURce:]PHASe:TRIGgered <NRf+>

–360 through +360 (degrees) MAXimum MINimum

triggered phase 1	= 0, triggered phase 2 = 240,
triggered phase 3	= 120
PHAS:TRIG 90	PHAS:TRIG MAX

[SOURce:]PHASe:TRIGgered?

<NR3>

PHAS:MODE PHASE

81