Agilent Technologies 6811B VOLTage:OFFSet:MODE, VOLTage:OFFSet:TRIGgered, Volt:Offs:Mode Fix

3 - Language Dictionary

VOLTage:OFFSet:MODE

Agilent 6811B, 6812B, 6813B, Only

This command determines how the dc offset voltage is controlled during a triggered output transient. The choices are:

FIXed	The offset is unaffected by a triggered output transient.
STEP	The offset is programmed to the value set by VOLTage:OFFSet:TRIGgered when a
	triggered transient occurs.
PULSe	The offset is changed to the value set by VOLTage:OFFSet:TRIGgered for a duration
	determined by the pulse commands.
LIST	The offset is controlled by the voltage list when a triggered transient occurs.

Command Syntax	[SOURce:]VOLTage:OFFSet:MODE <mode>
Parameters	FIXed STEP PULSe LIST
*RST Value	FIXed
Examples	VOLT:OFFS:MODE FIX	VOLT:OFFS:MODE:LIST
Query Syntax	[SOURce:]VOLTage:OFFSet:MODE?
Returned Parameters	<CRD>
Related Commands	VOLT:OFFS VOLT:OFFS:TRIG

VOLTage:OFFSet:TRIGgered

Agilent 6811B, 6812B, 6813B, Only

This command selects the dc offset that the output waveform will be set to during a triggered step or pulse transient.

The maximum peak voltage that the ac source can output is 425 V peak. This includes any combination of voltage, voltage offset, and function shape values. Therefore, the maximum value that can be programmed depends on the peak-to-rms ratio of the selected waveform. For a sinewave, the maximum voltage that can be programmed is 300 V rms.

NOTE:	The OUTPut:COUPling must be set to DC to get non-zero dc output.
	Command Syntax	[SOURce:]VOLTage:OFFSet:TRIGgered <NRf+>
	Parameters	–425 to +425 MAXimum MINimum
	Unit	V (dc voltage)
	*RST Value	0
	Examples	VOLT:OFFS:TRIG 50	VOLT:OFFS:TRIG INF
	Query Syntax	[SOURce:]VOLTage:OFFSet:TRIGgered?
	Returned Parameters	<NR3>
	Related Commands	VOLT:OFFS:MODE	OUTP:COUP

88