Agilent Technologies 6812B, 6834B MEASure:ARRay:VOLTage:HARMonic?, FETCh:ARRay:VOLTage:HARMonic?

Language Dictionary - 3

MEASure:ARRay:VOLTage:HARMonic?

FETCh:ARRay:VOLTage:HARMonic?

Phase Selectable

These queries return an array of harmonic amplitudes of output voltage in rms volts.

The first value returned is the dc component, the second value is the fundamental frequency, and so on up to the 50th harmonic. Harmonic orders can be measured up to the fundamental measurement bandwidth of the measurement system, which is 12.6kHz. Thus, the maximum harmonic that can be measured is dependent on the output frequency. Any harmonics that represent frequencies greater than 12.6kHz are returned as 0.

Query Syntax	MEASure:ARRay:VOLTage:HARMonic[:AMPLitude]?
	FETCh:ARRay:VOLTage:HARMonic[:AMPLitude]?
Parameters	None
Examples	MEAS:ARR:VOLT:HARM?	FETC:ARR:VOLT:HARM?
Returned Parameters	51 NR3 values
Related Commands	MEAS:ARR:CURR:HARM?	MEAS:ARR:VOLT:HARM:PHAS?

MEASure:ARRay:VOLTage:HARMonic:PHASe?

FETCh:ARRay:VOLTage:HARMonic:PHASe?

Phase Selectable

These queries return an array of harmonic phases of output voltage in degrees, referenced to the positive zero crossing of the fundamental component.

The first value returned is the dc component (always returned as 0 degrees phase) , the second value is the fundamental frequency, and so on up to the 50th harmonic. Harmonic orders can be measured up to the fundamental measurement bandwidth of the measurement system, which is 12.6kHz. Thus the maximum harmonic that can be measured is dependent on the output frequency. Any harmonics that represent frequencies greater than 12.6kHz are returned as 0.

Query Syntax	MEASure:ARRay:VOLTage:HARMonic:PHASe? <NRf>
	FETCh:ARRay:VOLTage:HARMonic:PHASe? <NRf>
Parameters	None
Examples	MEAS:ARR:VOLT:HARM:PHAS?
	FETC:ARR:VOLT:HARM:PHAS?
Returned Parameters	51 NR3 values
Related Commands	MEAS:ARR:CURR:HARM:PHAS? MEAS:ARR:VOLT:HARM?

41