Agilent Technologies 6834B, 6814B manual STATus:OPERation:NTRansition, STATus OPERation PTRansition

3 - Language Dictionary

STATus:OPERation:NTRansition

STATus:OPERation:PTRansition

These commands set or read the value of the Operation NTR (Negative-Transition) and PTR (Positive- Transition) registers. These registers serve as polarity filters between the Operation Enable and Operation Event registers to cause the following actions:

υWhen a bit in the Operation NTR register is set to 1, then a 1-to-0 transition of the corresponding bit in the Operation Condition register causes that bit in the Operation Event register to be set.

υWhen a bit of the Operation PTR register is set to 1, then a 0-to-1 transition of the corresponding bit in the Operation Condition register causes that bit in the Operation Event register to be set.

υIf the same bits in both NTR and PTR registers are set to 1, then any transition of that bit at the Operation Condition register sets the corresponding bit in the Operation Event register.

υIf the same bits in both NTR and PTR registers are set to 0, then no transition of that bit at the Operation Condition register can set the corresponding bit in the Operation Event register.

NOTE: Setting a bit in the PTR or NTR filter can of itself generate positive or negative events in the corresponding Operation Event register.

Command Syntax

Parameters

Default Value

Examples

Query Syntax

Returned Parameters Related Commands

STATus:OPERation:NTRansition <NRf+> STATus:OPERation:PTRansition <NRf+> 0 to 32767 MAXimum MINimum

0
STAT:OPER:NTR 32	STAT:OPER:PTR 1

STATus:OPERation:NTRansition?

STATus:OPERation:PTRansition? <NR1> (register value)

STAT:OPER:ENAB

96