Agilent Technologies 6813B, 6834B VOLTage SLEW MODE, VOLTage:SLEW:TRIGgered, Volt:Slew:Mode Step

Language Dictionary - 3

VOLTage:SLEW:MODE

Phase Selectable

This command determines how the output voltage slew rate is controlled during a triggered output transient. The choices are:

FIXed	The slew rate is unaffected by a triggered output transient.
STEP	The slew rate is programmed to the value set by VOLTage:SLEW:TRIGgered when a
	triggered transient occurs.
PULSe	The slew rate is changed to the value set by VOLTage:SLEW:TRIGgered for a duration
	determined by the pulse commands.
LIST	The slew rate is controlled by the voltage slew list when a triggered transient occurs.

Command Syntax	[SOURce:]VOLTage:SLEW:MODE <mode>
Parameters	FIXed STEP PULSe LIST
*RST Value	FIXed
Examples	VOLT:SLEW:MODE STEP
Query Syntax	[SOURce:]VOLTage:SLEW:MODE?
Returned Parameters	<CRD>
Related Commands	VOLT:SLEW VOLT:SLEW:TRIG

VOLTage:SLEW:TRIGgered

Phase Selectable

This command selects the slew rate that will be set during a triggered step or pulse transient. A parameter of MAXimum or INFinity sets the slew to its maximum possible rate. The SCPI representation for infinity is 9.9E37.

Command Syntax	[SOURce:]VOLTage:SLEW:TRIGgered <NRf+> INFinity
Parameters	0 to 9.9E37 MAXimum MINimum INFinity
Unit	V (volts per second)
*RST Value	INFinity
Examples	VOLT:SLEW:TRIG 50	VOLT:SLEW:TRIG MAX
Query Syntax	[SOURce:]VOLTage:SLEW:TRIGgered?
Returned Parameters	<NR3>
Related Commands	VOLT:SLEW VOLT:SLEW:MODE

93