Agilent Technologies 6843A, 6834B, 6814B VOLTage SENSe SOURce VOLTage ALC SOURce, VOLTage:SLEW

3 - Language Dictionary

VOLTage:SENSe:SOURce

VOLTage:ALC:SOURce

These commands select the source from which the output voltage is sensed. The commands are interchangeable; they both perform the same function. The following voltage sense sources can be selected:

INTernal

EXTernal

This senses the voltage at the output of the power amplifier on the inboard side of the output disconnect relay.

This senses the output voltage at the rear panel voltage sense terminals, which allows remote voltage sensing at the load.

Command Syntax	[SOURce:]VOLTage:SENSe:SOURce <source>
	[SOURce:]VOLTage:ALC:SOURce <source>
Parameters	INTernal EXTernal
*RST Value	INTernal
Examples	VOLT:SENS:SOUR INT	VOLT:ALC:SOUR EXT
Query Syntax	[SOURce:]VOLTage:SENSe:SOURce?
	[SOURce:]VOLTage:ALC:SOURce?
Returned Parameters	<CRD>
Related Commands	VOLT:SENS:DET

VOLTage:SLEW

Phase Selectable

This command sets the slew rate for all programmed changes in the ac rms output voltage level of the ac source. A parameter of MAXimum or INFinity sets the slew to its maximum possible rate. The SCPI representation for INFinity is 9.9E37.

Command Syntax	[SOURce:]VOLTage:SLEW[:IMMediate] <NRf+> INFinity
Parameters	0 to 9.9E37 MAXimum MINimum INFinity
Unit	V (volts per second)
*RST Value	INFinity
Examples	VOLT:SLEW 50	VOLT:SLEW INF
Query Syntax	[SOURce:]VOLTage:SLEW[:IMMediate]?
Returned Parameters	<NR3>
Related Commands	VOLT:SLEW:MODE	VOLT:SLEW:TRIG

92