of moving parts, breakage of parts, mounting, and other conditions that may affect i t s operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicatedelsewhere in this instruction manual. Have defective switches replaced by authorized service center. Don't use tool if switch does not turn it on and off.
19.GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded sur- faces. For example; pipes, radiators, ranges, refrigeratorenclosures.
20.REPLACEMENT PARTS. When servicing, use only identical replacement parts.
SAVE THESE INSTRUCTIONS.
Additional Planer Safety Rules
1.Be sure the cutter blade installationbolts are securely tightened before operating.
2.DO not hold housings. Keep hands clear of blades below.
VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified o n the nameplate o f the tool. A power source with voltage greater than that specified f o r the t o o l can result in SERIOUS INJURY t o the user - as well as damage t o the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source w i t h voltage less than the nameplate rating is harmful t o the motor.
Power Planer & Standard Equipment
0Tool body | 0Socket wrench |
Q Bevel guide | @Tool Case |
@Sharpeningholder | 0(+) Screwdriver |
@Bladegauge | @Wooden carrying case |
3
