Manuals / Cary Audio Design / Home Audio / Home Theater System

Cary Audio Design Cinema 11 owner manual Set Room EQ, Set Crossover Points, Set Speaker Phase

Models: Cinema 11

1 48

Download 48 pages 61.14 Kb

Page 27

AUTO SOUND SETUP

Set Balance
FL	0.0dB	-15.0dB to + 15.0dB
CEN	0.0dB	-15.0dB to + 15.0dB
FR	0.0dB	-15.0dB to + 15.0dB
SR	0.0dB	-15.0dB to + 15.0dB
SBR	0.0dB	-15.0dB to + 15.0dB
SBL	0.0dB	-15.0dB to + 15.0dB
SL	0.0dB	-15.0dB to + 15.0dB
SW	0.0dB	-15.0dB to + 15.0dB

9.Set Room EQ

During Set Room EQ testing, the following VFD appears on the display and checks are made to detect the test sound in the listening room, whether there are speakers connected to each channel or not and the polarity of the speakers as they are connected.

Set Room EQ
FL	Set / N/A	-15.0dB to + 15.0dB
CEN	Set / N/A	-15.0dB to + 15.0dB
FR	Set / N/A	-15.0dB to + 15.0dB
SR	Set / N/A	-15.0dB to + 15.0dB
SBR	Set / N/A	-15.0dB to + 15.0dB
SBL	Set / N/A	-15.0dB to + 15.0dB
SL	Set / N/A	-15.0dB to + 15.0dB
SW	Set / N/A	-15.0dB to + 15.0dB

10.Set Crossover Points

During Set Crossover Points testing, the following VFD appears on the display and checks are made to detect the test sound in the listening room, whether there are speakers connected to each channel or not and the polarity of the speakers as they are connected.

Set Crossover Points

FL	Full	Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz
CEN	Full	Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz
FR	Full	Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz
SR	Full	Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz
SBR	Full	Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz
SBL	Full	Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz
SL	Full	Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz
SW	Full	Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz

11.Set Speaker Phase

During Set Speaker Phase testing, the following VFD appears on the display and checks are made to detect the test sound in the listening room, whether there are speakers connected to each channel or not and the polarity of the speakers as they are connected.

Set Speaker Phase
FL	Inphase	Inphase / Outphase
CEN	Inphase	Inphase / Outphase
FR	Inphase	Inphase / Outphase
SR	Inphase	Inphase / Outphase
SBR	Inphase	Inphase / Outphase
SBL	Inphase	Inphase / Outphase

26

Image 27

Cary Audio Design Cinema 11 owner manual Set Room EQ, Set Crossover Points, Set Speaker Phase, Auto Sound Setup

Contents

Digital Surround Sound Processor CinemaAuto Sound Setup TABLE OF CONTENTSSpecifications InstallationIMPORTANT SAFETY INSTRUCTIONS 14.LIGHTNING For added protection for the unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges IMPORTANT SAFETY INSTRUCTIONS26.FCC INFORMATION FOR USER IMPORTANT SAFETY INSTRUCTIONSWELCOME THANK YOUCongratulations on becoming a Cinema 11 owner PRODUCT FEATURES The Cinema 11 offersWELCOME WELCOME UNPACKING AND INSTALLATIONFORMAT DESCRIPTIONS Warranty CardThe advantages of discrete multi-channelsystems over matrix are well known. But even in homes equipped for discrete multi-channel,there remains a need for high-qualitymatrix decoding. This is because of the large library of matrix surround motion pictures available on disc, VHS Hi Fi tape, and analog Stereo television broadcasts. The typical matrix decoder of today derives a center channel and a mono surround channel from two-channelmatrix stereo material. It is better than a simple matrix in that it includes steering logic to improve separation, but because of its mono, band-limitedsurround it can be disappointing to users accustomed to discrete multi-channelsound WELCOMEAbout Dolby Pro Logic All trademarks belong to their original ownersWELCOME DTS 96/24 offers the followingAudio Inputs SPECIFICATIONSAUDIO INPUTS / AUDIO OUTPUTS ANALOG AUDIO SECTIONChannel Separation 89 dB 1 kHz XLR Pin Configuration Pin 1 GroundDIGITAL AUDIO MAIN PATHFM Tuner ZONE 2 PATHSCONTROL AM TunerPOWER REQUIREMENTS Trigger OutputsSPECIFICATIONS CONTROLS AND DISPLAYS 1.POWER4.PRESET 5.PRESET14.NAVIGATION / ENTER 11.MASTER VOLUME KNOB12.INFRARED RECEIVING SENSOR WINDOW 13.ALPHANUMERIC DISPLAY2.ANALOG AUDIO IN INPUTS 2 THROUGH 8 RCA 7.AC INLET CONNECTORREAR PANEL 1.ANALOG AUDIO IN INPUT 1 XLR L + R13.ZONE 2 DIGITAL AUDIO OUT TOSLINK OPTICAL 10.AUTO SETUP MIC-IN11.RS-232PORT 12.SYSTEM-LINKPORTCONTROLS AND DISPLAYS REMOTE CONTROL15.BRIGHT Press this button to change the brightness of the display. Off, Low, Medium, High CONTROLS AND DISPLAYSCONTROLS AND DISPLAYS ZONE 2 REMOTE CONTROLINSTALLATION LOCATIONGETTING STARTED CONNECTING A MULTI CHANNEL POWER AMPLIFIER SECOND ZONE ZONEINSTALLATION REMOTE CONTROL POWER CONTROL CONNECTIONSPOWER CONNECTION INSTALLATIONAUTO SOUND SETUP HOW TO PERFORM AUTO SOUND SETUP5.Speaker Check 7.Set Distance 8.Set BalanceAUTO SOUND SETUP AUTO SOUND SETUP 11.Set Speaker Phase9.Set Room EQ 10.Set Crossover PointsInphase AUTO SOUND SETUPMANUAL SOUND SETUP Setting the Speaker Distance Delays SET DISTANCEMANUAL SOUND SETUP MANUAL SOUND SETUP SET BALANCESetting the Speaker Crossover Points SET CROSSOVER POINTSMANUAL SOUND SETUP Setting the Acoustic Calibration Room EQ manually SET ACOUSTIC CALIBRATION ROOM EQMANUAL SOUND SETUP 3. Press the MANUAL SOUND SETUPINPUT SETUP MENUBetter sounds using SET SPEAKER PHASE Setting the speaker phase manuallySETUP MENU Input To change input names SETUP MENUSETUP MENU SET ANALOG IN LEVEL SETTINGSSET ANALOG IN CONFIG To set Analog IN LevelTo set Analog in Config RADIOSETUP MENU Use the SETUP MENUManual tuning Listening to the RadioSETUP MENU Connection Chart SETUP MENUSet Up the AM and FM Antenna SETUP MENU To set ZONE 2 volumeZONE To set Zone 2 inputSETUP MENU To set PASSWORDAV SYNC Delay OTHERSETUP MENU BrightEdit Custom Name To set IR ControlsTo set Late Mode for Dolby Digital To set RESTORE DEFAULTTo set TRIGGERS To set AUTO INPUT SEEKNON-WARRANTYREPAIRS SERVICE AND CARECARE AND CLEANING FACTORY SERVICEINTERNATIONAL PURCHASERS Export markets UNITED STATES LIMITED WARRANTYWARRANTY DISCLAIMER EXCLUSIVE REMEDYo o o o o o o o o o o o o o o o o o o CARY AUDIO DESIGN