Cary Audio Design Cinema 11 owner manual Set Distance, Set Balance, Auto Sound Setup

AUTO SOUND SETUP

Speaker check
FL	Yes	(Yes/No)
CEN	Yes	(Yes/No)
FR	Yes	(Yes/No)
SR	Yes	(Yes/No)
SBR	Yes	(Yes/No)
SBL	Yes	(Yes/No)
SL	Yes	(Yes/No)
SW	Yes	(Yes/No)
Total: 8 speakers
Press ENTER now.

Note: The speaker check measures the state of use of all speakers whether actually used or not. For example, if the CEN speaker is not used, the test tone will require time to go from the FL to the FR, therefore be careful not to unplug the microphone or operate the Cinema 11 during this time.

6.When the speaker check ends, the following VFD appears on the display.

Total: 8 speakers (or however many speakers are connected) Press ENTER now

The results of the speaker check will be displayed. The front panel shows confirmation of the number of speakers detected. If some speakers are not detected, make sure that they are all connected properly. After confirming the total number of speakers, press the ENTER button.

7.Set Distance

During Set Distance testing, the following VFD appears on the display and checks are made to detect dart sound in the listening room, whether there are speakers connected to each channel or not and the polarity of the speakers as they are connected.

Set Distance
FL	0.0ft 0.00m	(0.0ft to 100ft/ 0.00m to 30.3m)
CEN	0.0ft 0.00m	(0.0ft to 100ft/ 0.00m to 30.3m)
FR	0.0ft 0.00m	(0.0ft to 100ft/ 0.00m to 30.3m)
SR	0.0ft 0.00m	(0.0ft to 100ft/ 0.00m to 30.3m)
SBR	0.0ft 0.00m	(0.0ft to 100ft/ 0.00m to 30.3m)
SBL	0.0ft 0.00m	(0.0ft to 100ft/ 0.00m to 30.3m)
SL	0.0ft 0.00m	(0.0ft to 100ft/ 0.00m to 30.3m)
SW	0.0ft 0.00m	(0.0ft to 100ft/ 0.00m to 30.3m)

8.Set Balance

During Set Balance testing, the following VFD appears on the display and checks are made to detect the test sound in the listening room, whether there are speakers connected to each channel or not and the polarity of the speakers as they are connected.

25