CONTROLS AND DISPLAYS
REMOTE CONTROL
This section explains how best to use the remote control to set up and operate the Cinema 11.
1.POWER OFF: Press this button to turn the Cinema 11 OFF.
2.TUNER SCAN: If INPUT is set to AM or FM, use this button to scan frequencies that have been PRESET. The scan will cycle through the stations, starting with the current station, one after another with 5 second delays.
3.MEMORY: Press this button to store the current broadcast band/reception frequency into memory.
4.TUNER SEEK (UP/DOWN): Up: Performs tuning in ascending frequency order. Down: Performs tuning in descending frequency order.
5.ROOM EQ: Press this button to turn the Room Equalization ON or OFF.
6.NAVIGATION/ENTER: Use the four NAVIGATION buttons to move through menu options shown on the Cinema 11 display. Press the ENTER button in the center to confirm selections made in the menus.
7.TEST: Press this button to start an AUTO SOUND SETUP test on your system.
8.SETUP: Calls up the Setup Menu on the Cinema 11 display, if active.
9.INPUT SELECTOR: Use these buttons
to select the desired source for your Cinema 11.
10.MUTE: Press this button to mute the main volume of the Cinema 11.
11.SURROUND/DATA FORMAT: Press the PLIIx, SUR. MODE, NEO:96/24, or CES 7.1 button once to select a surround format. Press the same button again to cycle through the various processing modes available for the selected format.
12.VOLUME: Press this button to adjust the volume up and down from
13.INPUT SEEK: Press this button to auto select the next active audio input source.
18
