Manuals / Cary Audio Design / Home Audio / Home Theater System

Cary Audio Design Cinema 11 owner manual Radio, To set Analog in Config, Setup Menu

Models: Cinema 11

1 48
Download 48 pages 61.14 Kb
Page 38
Image 38
To set Analog in Config:

SETUP MENU

To set Analog in Config:

1.Press the SETUP button to enter the SETUP MENU. The SETUP MENU/SPEAKER appears.

2. Press the

button until INPUT is selected.

The SETUP MENU/ INPUT menu appears.

3. Press the ENTER button to enter the CHANGE INPUT NAMES setup menu.

4. Press the

button until SET ANALOG IN CONFIG is selected.

5. Press the ENTER button to enter the INPUT 1 analog in config menu.

6. Use the

and

buttons to select the mode.

You can select the BYPASS mode or DSP mode.

7. Press the

button when you have made a selection.

Repeat steps 6 for the INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6, INPUT 7, INPUT 8, 7.1 IN and TUNER.

8. Press the

button to select BACK and press the ENTER button to return to the SET

ANALOG IN CONFIG. menu, or press the SETUP button to exit the SETUP MENU.

NOTE: As you can see from these settings, it is possible to use the Cinema 11 as an analog stereo preamp and as a surround sound preamplifier at the same time.

RADIO

The Cinema 11 radio allows the FM tuner section to select frequency ranges for USA/EURO or JAPAN and it can set AM frequencies for USA 10kHz step or to 9kHz step to match the broadcasts of stations outside North America.

-RADIO

-Set FM frequency

-Set AM frequency step

To set FM frequency:

1.Press the SETUP button to enter the SETUP MENU. The SETUP MENU / SPEAKER appears.

2.

Press the

button until INPUT is selected.

 

The SETUP MENU/INPUT menu appears.

3.

Press the

button until RADIO is selected.

4.

Press the ENTER button to enter the SET FM FREQ menu.

37

Page 37 Page 39
Page 38
Image 38
Cary Audio Design Cinema 11 owner manual Radio, To set Analog in Config, Setup Menu
Page 37 Page 39