SETUP MENU
Listening to the Radio
The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions.
1.Press the AM or FM button on the remote handset or front panel to select the band.
2.Tune to a station. There are two ways to do this:
Automatic tuning and saving station To search for stations in the currently selected band, press TUNER SCAN button in the remote handset. The Cinema 11 will start searching for the next station, one after another, beginning with the current station, for approximately 5 seconds each. Station frequencies will be assigned to station numbers in the memory.
Manual tuning
To change the frequency one step at a time, press TUNER SEEK.
3.Saving station presets
If you often listen to a particular radio station, it's convenient to have the processor store the frequency for easy recall whenever you to listen to that station. This saves the effort of manually tuning in each time. This processor can memorize up to 30 stations.
Tune to a station you want to memorize.
Press the MEMORY button and the display shows SAVE P00?
Press the NUMBER button to select a station preset. It will automatically save the station.
4.Improving FM stereo sound
If the TUNED or STEREO indicators don't light when tuning to an FM station because the signal is weak, press the FM MODE button to switch the processor into mono reception mode. This should improve the sound quality and allow you to enjoy the broadcast. An outside antennae or a cable FM connection will improve reception.
5.Listening to station presets
You will need to have some presets stored to do this, See Saving station presets above if you haven't done this already. Press AM or FM to select the band. Press the number on the remote control to recall the station preset.
39
