Sony DVW-790WS/790WSP Level Skin Tone DTL, Suppress Level, Skin Tone DET, Saturation, Hue, Width

2-1. Service Mode

No.	Page	Item	Setup	Description
20	LEVEL 3	SKIN TONE DTL	ON/[OFF]	Turns ON/OFF the skin tone detail function.
				(Same as the TEST OUT on the 1/2 pages of FUNCTION.)
		SUPPRESS LEVEL	X([0])	Sets signal amount of the skin tone detail.
		SKIN TONE DET	[OFF]/EXEC	Sets to the EXEC position when the range in which skin tone
				detail function is automatically set.
				(Shoot a skin tone object that fills the entire gate marker on VF,
				and press the rotary encoder.)
		SATURATION	X([0])	Sets the range of color saturation in which the skin tone detail
				function works.
		HUE	X([0])	Sets the range of color hue in which the skin tone detail function works.
		WIDTH	X([0])	Sets the width of color hue in which the skin tone detail function works.
		SKIN AREA IND.	ON/[OFF]	Turns ON/OFF the function of displaying zebra pattern on VF
				indicating the range detecting the skin tone detail.
21	LEVEL 4	MASTER BLACK	X([0])	Adjusts the master black level.
		MASTER GAMMA	X([0])	Adjusts the master gamma correction curve.
		MASTER BLACK	X([0])	Adjusts the master black gamma.
		GAMMA		It sets the rise-up of the gamma correction curve.
		KNEE POINT	X([0])	Adjusts the master knee point level during MANUAL knee adjustment.
		KNEE SLOPE	X([0])	Adjusts the master knee slope level during MANUAL knee adjustment.
		KNEE SATURATION	X([0])	Adjusts the knee saturation level.
		KNEE	[ON]/OFF	Turns ON/OFF the knee correction function.
				(The DCC switch setting is ignored.)
		WHITE CLIP	[ON]/OFF	Turns ON/OFF the white clip function.
				(Used during video signal adjustment.)
				Note : Video signal that exceeds the signal level of 109% or higher
				shall not be output even when this setting is set to OFF.
		WHITE CLIP LEVEL	X([0])	Sets the master white clip level.
22	LEVEL 5	BURST LEVEL	X([0])	Sets the burst level of encoder output.
		BURST PHASE	X([0])	Sets the burst phase of encoder output. (PAL only)
		R-Y	[ON]/OFF	Turns ON/OFF the function of outputting the R-Y signal to encoder output.
				(This function is set to ON automatically when CHROMA is set ON
				on 1/2 pages of FUNCTION.)
		B-Y	[ON]/OFF	Turns ON/OFF the function of outputting the B-Y signal to encoder output.
				(This function is set to ON automatically when CHROMA is set ON
				on 1/2 pages of FUNCTION.)
		R-Y LEVEL	X([0])	Sets the R-Y level of encoder output.
		B-Y LEVEL	X([0])	Sets the B-Y level of encoder output.
				Note : The following items are displayed in DVW-790WS/790WSP/
				709WS/709WSP only. The following items are valid when
				the 16:9/4:3 MODE on the WIDE SCREEN page is set to 4:3.
		R-Y LEVEL (4:3)	X([0])	Turns ON/OFF the function of outputting the R-Y signal to encoder output.
		B-Y LEVEL (4:3)	X([0])	Turns ON/OFF the function of outputting the B-Y signal to encoder output.
23	LEVEL 6	RGB LEVEL	X([0])	Sets the video signal level of the RGB output.
		RGB SYNC LVL.	X([0])	Sets the sync signal level of the RGB output.
		RGB SETUP LVL.	X([0])	Sets the setup level of the RGB output.
		ENC Y LEVEL	X([0])	Sets the Y signal level of the encoder output.
		ENC SYNC LVL.	X([0])	Sets the sync signal level of the encoder output.
		ENC SETUP LVL.	X([0])	Sets the setup level of the encoder output.
				Note : The following items are displayed in DVW-790WS/790WSP/
				709WS/709WSP only. The following items are valid when
				the 16:9/4:3 MODE on the WIDE SCREEN page is set to 4:3.
		RGB LEVEL (4:3)	X([0])	Sets the video signal level of the RGB output.
		ENC Y LEVEL (4:3)	X([0])	Sets the setup level of the RGB output.
2-8				DVW-790WS/709WS/707

DVW-790WSP/709WSP/707P P2V1