Sony DVW-709WS/709WSP, DVW-790WS/790WSP manual Description on EEPROM/NV-RAM Data, Spare CCD Units

1-5. Notes on CCD Unit

1-6. Description on EEPROM/NV-RAM Data

1-5. Notes on CCD Unit

1-5-1. Spare CCD Units

The CCD units listed below are available separately.

Order the applicable unit by CCD unit model through a sales channel for the CCD unit replacement.

Camcorder	CCD unit model	CCD block type*1
DVW-790WS	BKDW-C790W (UCJ)	ILA
DVW-790WSP	BKDW-C790WP (EK)	IMA
DVW-709WS	BKDW-C709W (UCJ)	IJA
DVW-709WSP	BKDW-C709WP (EK)	IKA
DVW-707	BKDW-C707 (UCJ)	INA
DVW-707P	BKDW-C707P (EK)	IOA

*1 : As for the detail on the CCD block type, refer to Section 1-5-2.

1-5-2. Description on CCD Block Number

Every CCD unit has its own ID number called CCD block number. It shows the CCD block type and serial number for the CCD block.

The CCD block number label is put in the CCD unit.

Example : ILA xxxxx

Serial number for the CCD unit

CCD block type

As for the procedure for replacing the CCD unit, refer to Section “3-2-1. Replacing the CCD Unit”.

1-6. Description on EEPROM/NV-RAM Data

The table below gives the stored data of EEPROMs/NV-RAM on the printed circuit boards:

Board	Ref. No.	EEPROM/NV-RAM	Stored data	Reference
DCP-17	IC152 (C3)	NV-RAM	All value of setup menu	Section 1-7
	IC140 (D5)	EEPROM	Special gamma table data	Section 1-7
ES-23	IC18 (B2)	EEPROM	Board adjustment data	Section 1-8
IF-716	IC102 (D4)	EEPROM	Model name and serial number	__

m

.The part numbers of these ICs which data is blank or factory-set are specified in “Section 1. Spare Parts” of the Maintenance Manual Part 2 Vol.2.

.As for the IC102 on the IF-716 board, it is impossible to write the original data into the new IC.

When replacing the IF-716 board, remove the IC102 on the new IF-716 board and replace with the used IC on the former board.

If it becomes necessary to replace with a new IC, contact your local Sony Service Center/Sales Office.

DVW-790WS/709WS/707 1-9

DVW-790WSP/709WSP/707P P2V1