Sony DVW-709WS/709WSP, DVW-790WS/790WSP manual Reel Table Replacement, Overviews

4-2. Parts Replacement

4-2-16. Reel Table Replacement

Overviews

Replacement

Reel Table Removal

Reel Shaft Cleaning

Reel Table Cleaning

Reel Table Installation (1)

Reel Table Height Adjustment

Reel Table Installation (2)

Operation Check

Adjustments after replacement

FWD Back Tension Adjustment

Brake Torque Check

Tape Running Adjustment

Notes

.Replacement of real table requires the new stop washer. When replacing the real table, prepare a new stop washer.

Stop washer 1.2 : 3-726-829-01 (1 piece is used.)

.The each five poly washers are attached at the top and bottoms of the S reel table and the T reel table.) The poly washers at the top of the reel table are the spare parts the reel table replacement. Take care not to lose or break.

Poly washer (0.13 mm thick) : 3-303-961-01

.The height of the S and T reel tables are to be made the reference for the tape running system. After replacing the S or T reel table, be sure to carry out the S or T reel table height adjustment.

Preparations

1.Check that the unit is in the unthreading and mode.

2.Turn the power off.

3.Remove the front lid and the outside panel. (Refer to section 1-6 of Maintenance Manual Part 1.)

4.Remove the cassette compartment. (Refer to section 1-8 of Maintenance Manual Part 1.)

DVW-790WS/709WS/707 P2V1 4-73

DVW-790WSP/709WSP/707P P2V1