4-30 DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
4-2-5. Pinch Roller Replacement
Overviews
Replacement
Pinch Roller Removal
Install Shaft Cleaning
Pinch Roller Installation
Pinch Roller Cleaning
Adjustments after replacement
Tape Running Adjustment
CUE Head height Adjustment
Note
If pinch roller is wornout, replace the pinch roller.
Preparations
1. Check that the unit is in the unthreading end mode.
2. Turn the power off.
3. Remove the front lid and the outside panel. (Refer to section 1-6 of Maintenance Manual Part 1.)
n
The pinch roller can be replaced when the cassette compartment is attached to the unit.
Tools
.Torque screwdriver bit (for M1.4) : J-6325-110-A
.Torque screwdriver (for 3 kg) : J-6325-400-A
.Cleaning cloth : 3-184-527-01
.Cleaning fluid : 9-919-573-01
4-2. Parts Replacement