4-2. Parts Replacement

Preparations

1.Check that the unit is in the unthreading end mode.

2.Turn the power off.

3.Remove the front lid and the outside panel. (Refer to section 1-6 of Maintenance Manual Part 1.)

n

The drum assembly can be replaced when the cassette compartment is attached to the unit.

Tools

.Torque screwdriver bit (for M2) : J-6325-380-A

. Torque screwdriver (for 3 kg)

: J-6325-400-A

. Cleaning cloth

:

3-184-527-01

. Cleaning fluid

:

9-919-573-01

Removal

1. Video Head Cleaner Removal

(1)Check that the unit is in the unthreading end mode.

(2)Turn the manual eject gear clockwise. Release the HC roller of the video head cleaner from the drum.

(3)Loosen the screw while holding the VH cleaner using a pair of tweezers and remove it from the unit.

(Refer to section 4-2-6.) n

The screw can not be removed due to the drop-safe.

2.Disconnection of the Brush Assembly Connector

Disconnect the connector on the brush assembly board.

DVW-790WS/709WS/707

4-25

DVW-790WSP/709WSP/707P P2V1

Page 108 Page 110
Page 109
Image 109
Sony DVW-709WS/709WSP, DVW-790WS/790WSP Removal Video Head Cleaner Removal, Disconnection of the Brush Assembly Connector
Page 108 Page 110
Top Page Image Contents