Sony DVW-709WS/709WSP, DVW-790WS/790WSP manual Brush Assembly Installation

5. Brush Assembly Installation

(1)Temporarily attach the brush assembly to the brush support using the screw shown in the figure.

(2)Move the brush base in the direction of the ar- row while pressing down the brush base above the brush support and temporarily attach the brush assembly using the other screw.

(3)Tighten the screws which are attached in steps

(1) and (2).

(4)Check that the brush touches against the slip ring.

n

Once steps (1) to (3) are completed, the height of the brush and contact pressure against the slip ring will be automatically adjust.

(5)Connect the connector on the brush assembly board.

	4-2. Parts Replacement
Brush base	P 2x4
Brush
Slip ring
	Temporarily attach
	this screw first.
Brush support
Brush	Slip ring
Connector

6. Brush Cover Installation

Align the hole of the brush cover with the shaft of the slip ring and tighten the two screws.

DVW-790WS/709WS/707 4-23

DVW-790WSP/709WSP/707P P2V1