Sony DVW-790WS/790WSP, DVW-709WS/709WSP manual With drop-safe Pin of the chassis

4-2. Parts Replacement

5.Mechanical Deck Assembly Installation

(1) Check that the bending portion of the HN holder of the mechanical deck assembly puts in the square hole of the reinforcement bracket which attaches to the HN-260 board.

	HN holder
Square hole	Reinforcement
	bracket
	HN-260 board
HN holder

(2)Hold the shaded portion of the arm on the cas- sette compartment, or cassette guide, and HN- 260 board shown in the figure and align the two guide holes on the mechanical deck as- sembly with the two pins of the chassis.

(3)Push down the ornamental bracket of the HN- 260 board and connect the 100-pin connector to the mother board.

(4)Tighten the four screws of the mechanical deck assembly.

4-60

100-pin connector
	HN-260 board
		Screws
	Cassette guide	(with drop-safe)
Cassette
		HN-260 board
compartment
arm
Screws		Guide hole
(with drop-safe)		Pin of the chassis
		DVW-790WS/709WS/707
		DVW-790WSP/709WSP/707P P2V1