Sony DVW-709WS/709WSP, DVW-790WS/790WSP manual FWD Back Tension Adjustment, Tool

4-3. Mechanical Adjustments

4-3-2. FWD Back Tension Adjustment

Note

When replacing the brake band assembly or S reel table assembly, or carrying out the tension regulator operating position adjustment, be sure to carry out FWD back tension adjustment.

Preparations

1.Check that the unit is in the unthreading end mode.

2.Remove the front lid and the outside panel. (Refer to section 1-6 of Maintenance Manual Part 1.)

n

For this adjustment, it is recommended to attach the cassette compartment to the unit.

If the cassette compartment does not attach to the unit, interrupt the photo interrupter (cassette compartment lock switch) mounted on the SE-210 board using a black paper or equivalent so that the unit is in the cassette lock state. After placing a weight on a FWD back tension measuring cassette tape so as not to rise it up, carry out this adjustment.

Tool

FWD back tension measuring cassette tape : J-6323-890-A

DVW-790WS/709WS/707 4-121

DVW-790WSP/709WSP/707P P2V1