2-20 DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
2-1-3. Setup Menu List
The setup menu items can be written into the setup card. At the same time, turning ON/OFF and adjust-
ment of functions can be implemented using the remote control unit RM-P9/B150.
The menu items that can be saved in the setup card and those that can be controlled from the remote
control unit RM-P9/B150 among all menu items, are shown as follows when the service mode is selected.
SETUP C Yes or No is displayed to indicate whether data can be written in the setup card.
RM-P9 M, P, or No is displayed to indicate whether this item can be operated when remote
control unit RM-P9 is connected.
M (MENU) : Can be operated at the bottom of the RM-P9.
P (PANEL) : Can be operated in the front of the RM-P9.
No : Cannot be operated by the RM-P9.
RM-B150 M, P, or No is displayed to indicate whether this item can be operated when remote
control unit RM-B150 is connected.
M (MENU) : Can be operated at the bottom of the RM-B150.
P (PANEL) : Can be operated in the front of the RM-B150.
No : Cannot be operated by the RM-B150.
F-SET Sets the factory default value.
C-SET Write the setting state of the customer.
2-1. Service Mode