Sony DVW-709WS/709WSP, DVW-790WS/790WSP - page 180

4-96 DVW-790WS/709WS/707 P2V1
DVW-790WSP/709WSP/707P P2V1
4-2. Parts Replacement
(2) Align the mark (notch) of the T threading gear
with the mark (hole) of the ST driving gear as
shown in the figure.
(3) Attach the rail using the two screws.
(4) Put the flange portion at the link shaft of the T
threading gear assembly in the rail while open-
ing the groove of the rail.
Mark (ø0.8 hole)
ST driving gear
Mark (Notch)
T threading gear assembly
15. Slider Installation
(The procedures for attaching the S
slider are the same as for attaching
the T one.)
(1) Put the slider in the rail in the direction of the
arrow.
(2) Put the installing shaft of the slider in the in-
stalling hole of the link using the new E-ring.
S slider
S rail
T rail
T silder