Sony DVW-709WS/709WSP manual Automatic Iris Adjustment, Iris Mode, Iris SET, Iris Weight → 0 MIN

7-20. Automatic Iris Adjustment

7-20. Automatic Iris Adjustment

16:9 mode

Preparation

.On the setup menu, set as follows.

PAGE	: S24*LEVEL 7
ITEM	: TEST OUT → ENC

.OUTPUT/DCC switch (inside panel) → CAM/ON

.Shoot a grayscale chart (16:9) in the full underscanned monitor frame.

.Lens IRIS → AUTO

Adjustment Procedure

Equipment : Waveform monitor

Test point : TEST OUT connector

1. Select the 16:9 mode.

PAGE	: S14*WIDE SCREEN
ITEM	: 16:9/4:3 MODE → 16:9
2. On the setup menu, adjust as follows.
PAGE	: S29*LEVEL 12
ITEM	: IRIS MODE
Spec.	: Set depending on the application.

	(Automatic iris operation mode setting
	can be done from the average level to
	peak-to-peak level of the video signal.)
IRIS MODE = MIN → peak-to-peak level
IRIS MODE = MAX → average level
3. On the setup menu, adjust as follows.
PAGE	: S29*LEVEL 12
ITEM	: IRIS SET
Spec.	: A = 100 ±2 IRE (NTSC)
	A = 700 ±14 mV (PAL)

A

4. On the setup menu, set as follows.

PAGE	: S29*LEVEL 12
ITEM	: IRIS WEIGHT → 0 (MIN)

5.Shoot an area where the auto iris is not wanted to work in the white window chart.

6. On the setup menu, adjust as follows.

PAGE	: S29*LEVEL 12
ITEM	: IRIS WEIGHT
Spec.	: Increment the IRIS WEIGHT value
	until the lens iris is open.
7. On the setup menu, adjust as follows.
PAGE	: S29*LEVEL 12
ITEM	: IRIS SPEED (Factory setting: 2)
Spec.	: Set to the desired operation speed of
	auto iris.
8. On the setup menu, set as follows.
PAGE	: S29*LEVEL 12
ITEM	: CLIP HIGH LIGHT → ON or OFF
Spec.	: Adjust for AUTO iris level to the
	customer’s specifications.

DVW-790WS/709WS/707 7-33

DVW-790WSP/709WSP/707P P2V1