Sony DVW-790WS/790WSP Desoldering the Leads of Slip Ring Assembly, Upper Drum Assembly Removal

4-2. Parts Replacement

3.Desoldering the Leads of Slip Ring Assembly

Desolder the three leads of the slip ring assembly from the UDR-9 board on the upper drum assem- bly.

Lead wires (RED, BLUE, BLK)

UDR-9 board

Upper drum assembly

Soldered points

Slip ring

4. Upper Drum Assembly Removal

(1)Put an L wrench in the holes of the upper drum assembly and remove the four screws.

(2)Lift just above and remove the upper drum as- sembly.

m

.After removing, take care not to damage the up- per edge of the lower drum.

.Remove the screws from the removed upper drum assembly using a pair of tweezers.

Screw holes	Screw holes
Upper drum assembly

4-10 DVW-790WS/709WS/707

DVW-790WSP/709WSP/707P P2V1