Sony DVW-709WS/709WSP, DVW-790WS/790WSP manual Flare Adjustment

7-14. Flare Adjustment

16:9 mode

Preparation

.On the setup menu, set as follows.

PAGE	: S24*LEVEL 7
ITEM	: TEST OUT → ENC

.OUTPUT/DCC switch (inside panel) → CAM/ON

.Shoot a grayscale chart (16:9) in the full underscanned monitor frame.

Equipment	: Waveform monitor
Test point	: TEST OUT connector
Setting point	: 1Lens IRIS
Spec.	: Open the lens iris by one step from the

reference setting

A = 100 ±2 IRE (NTSC) A = 700 ±14 mV (PAL)

A

Adjustment Procedure

Equipment	: Waveform monitor
Test point	: TEST OUT connector

	7-14. Flare Adjustment
4. On the setup menu, adjust as follows.
PAGE	: S24*LEVEL 7
ITEM	: R FLARE
Spec.	: Minimize the carrier leakage at portion C

C

5. On the setup menu, adjust as follows.

PAGE	: S24*LEVEL 7
ITEM	: B FLARE
Spec.	: Minimize the carrier leakage at portion C.

6. Repeat steps 4 and 5 several times.

1.	Select the 16:9 mode.
	PAGE	: S14*WIDE SCREEN
	ITEM	: 16:9/4:3 MODE → 16:9
2.	On the setup menu, set as follows.
	PAGE	: S24*LEVEL 7
	ITEM	: G FLARE → 0

3.Select portion B by using the waveform monitor.

B

DVW-790WS/709WS/707 7-19

DVW-790WSP/709WSP/707P P2V1