Sony DVW-790WS/790WSP manual CUE Head Azimuth Check, CUE Head Head-to-tape Contact Adjustment

5-6. CUE Head Azimuth Check

Checks

1. Play Back

Play back ZR2-1/P (from 15 minute to 25 minute segment).

2. CUE Head Azimuth Check

(1)Turn the azimuth adjusting screw clockwise or counterclockwise so that the output waveform is the maximum.

(2)Repeat the mode change from the EJECT mode to PLAY mode 2 or 3 times. Check that the output level is the same as the level in the step (1) and is not changed.

(3)Repeat the mode change from the REV mode to PLAY mode 2 or 3 times. Check that the output level is the same as the level in the step (1) and is not changed.

REV search mode

Press the REW button after pressing the PLAY button. (The PLAY and REW buttons on the keyboard light up.)

3.CUE Head Head-to-tape Contact Adjustment

Refer to section 5-7.

4.CUE Head Height Check

Refer to section 5-5.

5.CUE/TC Head Position Check

Refer to section 5-8.

CUE head assembly	Azimuth adjusting screw
	Maximize.

5-24	DVW-790WS/709WS/707
	DVW-790WSP/709WSP/707P P2V1