Sony DVW-709WS/709WSP, DVW-790WS/790WSP manual Tape Running Check Around the Capstan Shaft

8.Tape Running Check Around the Capstan Shaft

(1)Enter the REW mode at tape end of BCT- D40 (from 30minute to 40 minute). After 2 or 3 seconds, enter the F FWD mode. When changing the mode, check that the tape running conditions satisfy the specifica- tions 7 between CUE head and capstan shaft. If the specifications 7 is not satisfied, perform step 9 and higher.

(2)Repeat the step (1) 2 or 3 times and re-check.

(3)Enter the F FWD mode, and after 2 or 3 seconds enter the REW mode.

When changing the mode, check that the tape running conditions satisfy the specifica- tions 7 between CUE head and capstan shaft. If the specifications 7 is not satisfied, perform step 9 and higher.

(4)Select the dip switch S1-1 on the HN-260 board to the ON.

The red LED will light up.

(5)Press the switch S3 on the HN-260 board 10 times.

After pressing, check that the Nos. 1 and 3 of the MODE display LEDs light up.

(6)Enter the REVx1 mode by pressing the REW button. After 2 or 3 seconds, press the PLAY button.

When changing the mode, check that the tape running conditions satisfy the specifica- tions 7 between CUE head and capstan shaft. If the specifications 7 is not satisfied, perform step 9 and higher.

(7)Select the dip switch S1-1 on the HN-260 board to the OFF.

The red LED will be turned off.

5-1. Tape Running Adjustment

CUE/TC head

Capstan

T3 tape guide

Pinch roller

Capstan

CUE/TC head

Tape T drawer guide

Tape wrinkle Pinch roller

Specifications 7:

Tape runs without any wrinkle.

If the tape wrinkle occurs, check that the tape wrinkle disappears within 2 seconds and do not damage the tape.

DVW-790WS/709WS/707	5-9
DVW-790WSP/709WSP/707P P2V1